Request an Inspection

Planning & Development Services uses a phone-automated inspection scheduling system that allows you to schedule, change and confirm inspections, as well as request inspection results. To speak to a P&DS staff member, press “o.”
Automated inspection scheduling is available 24 hours a day at 303-441-3280.

You may also use the Construction Permit Status Report to find out what inspections are needed, scheduled and/or completed for your permit.

Note: A responsible party must be present during the inspection.

How to Schedule an Inspection

• Dial 303-441-3280.
• Press “1” for building inspections.
• Press “1” to request an inspection.
• Enter your nine-digit permit number (Example: 200209999).
• Enter an onsite contact phone number.
• Enter the four-digit inspection code.
• Select a date for inspection.
• Request to have inspection results faxed to you, if desired.

Before Your Inspection
Complete the information sheet in the permit packet, and leave it with the permit on the construction site.

How to Schedule All Rough or All Final Inspections at One Time
If you need to schedule all of your rough or final inspections at one time, you can use a single Inspection Code.

• Use Inspection Code 5000 to schedule all rough inspections.
• Use Inspection Code 6000 to schedule all final inspections.

Confirm an Inspection - Today’s Inspection Schedule

Check this page after 9 a.m. to view the daily inspection schedule. You can also confirm your scheduled inspection date with our automated scheduling system:

• Dial 303-441-1880.
• Press “2” for inspection requests.
• Press “1” for building inspections.
• Press “2” to confirm an inspection request.
• Press “1” to confirm today’s inspections.
• Enter your nine-digit permit number.
• The inspection scheduling system will play the list of today’s inspections scheduled for the permit number entered.

Change your Inspection Date

• Dial 303-441-1880.
• Press “2” for Inspection Requests.
• Press “1” for Building Inspections.
• Press “2” for Future Inspections.
• Press “2” to Change Future Inspections.
• Enter your nine-digit permit number (Example: 200209999).
• Enter the four-digit inspection code.
• The inspection scheduling system will play the date of the scheduled inspection.
• Press “2” to change the inspection date.
• Select a date for inspection.
  

Inspection Codes

* To schedule all rough inspections at one time, use code 5000.
+ To schedule all final inspections at one time, use code 6000.

* To schedule all rough inspections at one time, use code 5000.
+ To schedule all final inspections at one time, use code 6000.

Last Updated on Tuesday, 05 March 2013 14:43